← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: Cigarette lighter wiring
From:Neil <musomuso@GMAIL.COM>
Date:Tue, 16 Nov 2021 18:34:54 -0800

Well, as kind of a guess, the X circuit could likely handle that added load.

Two other thoughts:

- use ignition switch 15 to control a relay carrying B+ from a spare
B+ connection in fuse panel?

- if door buzzer is disabled, use ignition switch Su circuit to do same?

You'd obviously need to fuse a new circuit.

I'm sure there's an elegant way to do this.

Neil.

On 11/16/21, Dan N <dn92610@gmail.com> wrote:
> Thanks for the reply...
>
> The vans are 1990 Carat, 1990 tintop syncro, 1989 GL tintop.
>
> I have dash cams using the cigarette lighter plug (low draw amp)... there
> are times that I plug it in and forget to unplug it... then it continues to
> run for a long time...
>
> so I want the dash cam OFF when I turn OFF the engine.
>
> thanks
>
> On Tue, Nov 16, 2021 at 2:32 PM Neil <musomuso@gmail.com> wrote:
>
>> On 11/16/21, Neil <musomuso@gmail.com> wrote:
>>
>> > - will potential added Amps via load(s) on cig lighter socket be too
>> > much for the X circuit ?
>>
>> i.e. with all X circuit loads on, will the added load(s) connected to
>> the cig lighter socket make total potential Amp draw too high for the
>> X circuit ?
>>
>> Neil.
>>
>> On 11/16/21, Neil <musomuso@gmail.com> wrote:
>> > Hi Dan.
>> >
>> > The model year, type, of Vanagon may be a factor. If connected the cig
>> > socket to an aux battery isn't an option.....
>> >
>> > Connect it to the X circuit controlled by the load reduction relay?
>> > That said, a few thoughts:
>> >
>> > - will potential added Amps via load(s) on cig lighter socket be too
>> > much for the X circuit ?
>> > - will added current through the ignition switch cause it to wear out
>> sooner
>> > ?
>> > - when key is turned to operate the starter motor, the X circuit is
>> > disabled.
>> >
>> > Neil.
>> >
>> >
>> >
>> > On 11/16/21, Dan N <dn92610@gmail.com> wrote:
>> >> hi everybody,
>> >>
>> >> I need help on how to wire the cigarette lighter differently so it
>> >> will
>> >> work only with the ignition ON. The OEM wiring put the cigarette
>> >> lighter
>> >> ON
>> >> with the ignition OFF.
>> >>
>> >> thank you,
>> >>
>> >> dan
>> >>
>> >
>> >
>> > --
>> > Neil n
>> >
>> > VE7TBN
>> >
>> > 1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt
>> >
>> > 1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8
>> >
>> > VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
>> >
>>
>>
>> --
>> Neil n
>>
>> VE7TBN
>>
>> 1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt
>>
>> 1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8
>>
>> VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
>>
>

-- 
Neil n

VE7TBN

1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt

1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8

VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>

← Previous in threadNext in thread →
Back to November 2021, week 3
Have something to add on this topic today? Revive this thread in the forum »