Skip to main content
vanagon.com
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:need help w/ wiring harness problem ? / loss of power
From:Steve & Liz Fallin
Date:Sat, 5 Jul 1997 15:17:37 +0000

It's the holiday weekend and where else would a good vanagon owner 
be but working on the van?  <g> 

I had spitzen sparken on the aux battery circut several weeks ago.  
disconnected aux battery, 
 Had the van in to be tuned up / Emissions 
check and failed. timing, afm etc all check out ok. 
got a waiver on the emissions.  
van runs like doody since the spitzen sparken , no power, rough, now 
won't even start. Tried the local dealer, what a joke. I checked the 
archives and ran into the wiring harness fix. so I beghan to check 
mine out. I had 4 ohms resistance between the ecu and the idle 
stabilizer, 2 ohms between the ecu and fuel pump relay. All other 
values 0 . Is 4 ohms enough resistance to cause the problems here? 
should I look closer at the fuel delivery system? 

Also this is a replacement engine where do I look for the id # I 
can't seem to find the crankcase ventilator. 

Thanks 
Steve

Steve & Liz Fallin,
Proud Parents of Brendan (9/15/96),
Kitty-Parents to Madeline & PC,
and of course Bombadil, our 84 Westy.

Have something to add on this topic today? Revive this thread in the forum »