I just received my Bus Depot sliding door screen, which looks to be well made.
However, there are not any suggestions or instructions where to install the snaps.  

I found these postings on YouTube. https://www.youtube.com/watch?v=r3fCZFTpOfw 
& in French... https://www.youtube.com/watch?v=6OwA2TmzgIQ

Does anyone have experience with installation of this great screen?

I have an 84 Westy Wolfie, with the older style door (with the quiet close rear handle).

BD provided the response below.

Thanks!
 
Jack

-----Original Message-----
From: Bus Depot Customer Service [mailto:sales@busdepot.com] 
Sent: Wednesday, August 5, 2020 3:32 PM
To: 'Jack R'
Subject: RE: Bus Depot Sliding Door Screen Question

Hi Jack,

There are no factory instructions for the screen. It is a clone of an original German screen and if there were instructions for the original (which would have been entirely in German anyway) we have never found a copy. Basically you will want to have someone help you hold it up, mark out the spots to screw in a few of the included snaps around the door opening as desired, test-fit it, and then install the rest of the snaps. In terms of orientation, there is a slit near the bottom of the screen and that goes toward the front of the van, not toward the bench seat.  Most people use self-tapping screws (available at any hardware store or home center) to attach the snaps because then you don't have to drill first.   
>