"devlis in the details" as they say.

There is indeed wear at faces on the valve adjuster screws. The valve
stems look ok so far. Were I staying invested in the WBX I'd replace
those adjuster screws.

Neil.

On 5/21/17, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> When re-installing the rockers technique is part of the job. Setting the
> engine to top dead center and backing the valve adjusting screws out makes
> it easy to install the rockers, rotating the push rods to make sure they are
> seated properly. Then do a proper valve adjustment. And you will know they
> are as they should be. One point is that the valve adjusters do wear into
> the valve stems. On high mileage engines it is a good idea to replace the
> adjusting screws anytime they will be disturbed. Having the screws and valve
> stems tear each other up can make for a bit of a mess.
>
> Dennis
>
>
>

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>