

| Subject: | Re: GOWESTY AFM no start problem |
| From: | OlRivrRat |
| Date: | Thu, 30 Jun 2016 23:19:31 -0600 |
DJ
@ What Altitude do You Live & Drive Mostly ~ It makes a Diff' in where Your Eng's Timing Needs to be ~
ORR ~ DeanB
On 30 Jun , 2016, at 10:42 AM, Dennis Jowell wrote:
> Hall sensor is installed, Westy starts up, which is a bonus for me.
> Now to do the timing of the WBX. I found my old timing light from Sears 1971 vintage I suspect it's NG.
> I'm headed down to my Sears store for a new Craftsman timing tool.
> Any suggestions on the type I should get? Not to many choices here where we live. Sears is a 90 miles round trip.
> It has been a long time since I timed any engine with a light. My several old VW bugs I timed using a 12 volt bulb and a pair of alligator clips.
> Also a little confused on the process of timing the 2.2 WBX engine.
> Any suggestions? or thoughts?
>
> Dennis J
>
> Dennis Jowell
> Scotch Hollow Farm
> Newbury, Vermont
>
>
>> On Jun 28, 2016, at 12:35 PM, Neil N <musomuso@gmail.com> wrote:
>>
>> Way to go!
>>
>> the pin on dizzy is not too hard to remove. Here's a pic of what I did:
>>
>> http://tinyurl.com/hg2jaqp
>>
>> its just a piece of annealed copper pipe. I supported other end of
>> dizzy with piece of wood.
>>
>> Are the small wires inside dizzy, to hall, at fault?
>>
>>
>>
>>> On 6/28/16, Dennis Jowell <dennisjowell@gmail.com> wrote:
>>>
>>> I found the problem! Worn out Hall Sensor. I added a zip tie to the plug on
>>> the distributor not the harness. Starts right up. Thanks to the suggestion
>>> from a Van Cafe old time mechanic and Chris their customer service person.
>>> I have a new Hall Sensor ordered. Should have it here at the farm this
>>> week.
>>
>> --
>> Neil n
>>
>> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
>>
>> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
>>
>> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>
>>
>> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>Have something to add on this topic today? Revive this thread in the forum »