

| Subject: | Re: Tires again! |
| From: | T Collins |
| Date: | Mon, 1 Aug 2011 08:21:28 -0400 |
So just as a devils advocate, my vanagon only has the placard describing 185/70/14's on that spot, do other vanagons have the number for 205/70/14's on that placard too and if so what is that numbers of PSI front and back for a 2wd 1985 7 seater? Oh and by the way: I did see a range in the European Haynes of 30/36 for the PSI front/back. I found that to be a little hard to believe, but they did Thanks, Tony On Fri, Jul 29, 2011 at 7:38 PM, Dave Mcneely <mcneely4@cox.net> wrote: > the pressure required according to VW is unequivocal, and is stated on the > placard inside the driver's door. For the given tire sizes, the pressure is > there. I recommend using it. mcneely > > ---- ralph meyermann <ralphmeyermann@GMAIL.COM> wrote: > > I also think the pressure needs to be adjusted for ride and total carried > > weight. > > > > On Jul 26, 2011 11:26 AM, "David Vickery" <david_vickery@yahoo.com> > wrote: > > > > --- On Mon, 7/25/11, ralph meyermann <ralphmeyermann@GMAIL.COM> wrote: > > > looking at those altimax bu... > > I could be wrong but I think it is a misconception about minimum load > > rating. You want a tire that supports the Gross Axle Weights. When VW > > selected a tire that could be inflated well above the GAWR, they chose > lower > > inflation pressures that brought load capacity down to the GAWR for a > > smoother ride. That is how they came up with 30/40 psi on the 97R > Michelin > > MXT. And same thing for the 185R commercial tires. They did not inflate > > them to the max, but where they set them, was at or close to the gross > axle > > weight. > > > > So if your tires are capable of carrying the max axle weeights and you > set > > the pressure of your new tires to a point where it supports the gross > axle > > weight, you are at the correct load. > > -- > David McNeely > -- 82 Scirocco "Rodolfo" 85 Vanagon "El Guapo" http://groups.google.com/group/wash-co-vws2<http://groups.google.com/group/wash-co-vws2?lnk=gcimh> (new)
Have something to add on this topic today? Revive this thread in the forum »