I'm about to start replacing the original starter cable in my 85 Westy.
Somebody please yell if I'm doing something bad!

My plan is to put a battery post clamp on the battery end of the cable.  I'm
using 2ga. cable, which should be more than adequate, though possibly
difficult to get around the corner beneath the battery box.  I'll put a
"hole" fitting at the other end, once I figure out the correct length.  As
someone suggested, I'm planning on using the balance of the cable to create
a link between the starter and the alternator (big cable - don't recall the
name of the connection).  I read the description of tying a string to the
old cable, etc. and plan to pretty much follow that path.

Question:  The cable coming off the alternator is dual, as in two cables in
one shared/paired housing (or at least seems to be).  To where do these two
cables go?  I'm assuming one of them goes up to the battery, but the other?

I believe that's it.  Please bail me out if it sounds like I'm going to need
it.

Thanks in advance,

Karl Wolz