Part III

Air Conditioning - (this test is for vehicle with both manual and
automatic transmissions)

___ Engine idling, turn on A/C while observing multi-meter

** Milliamp reading should increase.

___ If NO: remove idle stabilize control unit. connedt US1115 L.E.D.
tester between terminals 2 and 5 of connector plug for stabilization
control unit. Start engine and switch  A/C on and off. L.E.D. must light
when A/C is on, and off when A/C is off.

If YES: replace idle stabilization control valve.

If NO: ensure that A/C compressor clutch is functioning properly, repair
if necessary, and re-test. Check wiring from A/C compressor clutch to
terminal 2 of conneor plug for idle stabilization unit.

Part IV