

| Subject: | Gauge panel regulator was Re:...gas guage) |
| From: | David Beierl |
| Date: | Fri, 30 Jan 2009 12:59:06 -0500 |
At 11:41 AM 1/30/2009, Mike S wrote: >TCA700Y, they are hard to find at a reasonable price these days. If you >need one, the best bet is to try and get one off a junk instrument >cluster. They were used on many/most VW/Audis from the mid '70's >through the '80's. Sounds like a candidate for a +12v regulator and a few diode drops, or a +5 and a five-volt zener on the ground lead. It's not like it's a precision application... Newark Electronics, an outfit not known for low prices, sells LM340T5s for $1.34 in onesies. <http://www.newark.com/jsp/displayProduct.jsp?sku=37C1790&CMP=KNC-G10000683&HBX_OU=50&HBX_PK=LM340T5> And I think this 5.1v zener would probably do, $0.34 in onesies. <http://www.newark.com/fairchild-semiconductor/bzx55c5v1/zener-diode/dp/58K8776> If you do either of these tricks, make sure the voltage doesn't end up low, or your coolant light will never stop blinking...spec is 10v +/- 0.5 but I'd recommend 10v +0.5 -0 Remember that zener diodes go in the circuit with the band (or arrow) pointing toward the plus side, in this case the ground lead of the regulator. -- David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage," '85 GL "Poor Relation"
Have something to add on this topic today? Revive this thread in the forum »