

| Subject: | 90 Multivan auto locks problem |
| From: | Debra Clark |
| Date: | Sat, 17 Jan 2009 14:41:14 -0800 |
Greetings, I used to be a member of this list several years ago when I first became a Vanagon owner. My family bought our 1990 Multivan in 2001 and I've turned to this list many times for insight. About 3 years ago, I just got so busy that I wasn't keeping up with the mail and unsubscribed. Well a new problem has come up and I my owner's manual and my own investigation hasn't helped. Since I just spent a whole lot on a transmission leak, I'd rather not go back to my mechanic yet. Here's the problem. My van has auto door locks and when I turn my key in either of the front door locks, the locks will unlock and then re-lock. If I quickly open the door when it's unlocked the mechanism will continue to cycling through this unlock/lock series until I close the door and it can complete the latch/lock. I can get in by manually opening the sliding door. I've tried to find the fuse in the handbook and it says that the auto locks are a fuse that located above the #1-22 main configuration. All I seem to have above that are big square blocks that 'plug' in. I've tried unplugging these to see if it stops the door locks and I've had no success. Although, this started a couple days after I got the van back from the mechanic, I don't think it's related because it did work fine for a day or two. Also, it hasn't rained during this time period but has been colder for this area. (Southern California) I've sprayed WD-40 in and around the locking mechanism but that didn't help either. So I have 2 questions: Where's the fuse so that I can disable the auto mechanism, and where should I start looking for a short? Thanks for all your help. Debra 90 Burgundy Multivan, Automatic
Have something to add on this topic today? Revive this thread in the forum »