Scott,
I did find one locally, and as you mention they are the same for all VWs as
far as I know.

RE making one: turning stuff like that is something I really miss about not
having access to a lathe!

Jim

On Wed, Jul 9, 2008 at 1:46 AM, Scott Daniel - Turbovans <
sottdaniel@turbovans.com> wrote:

> find one yet ?
> air-cooled 1600 might use the same part.
> or you could make one. scott ----- Original Message ----- From: "Jim
> Felder" <jim.felder@GMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Friday, July 04, 2008 7:22 PM
> Subject: Need dowel pin for 2.1 crankcase.
>
>
>
>  I need a dowel pin for the only place it is used to locate a crank bearing
>> in a 2.1 engine. If you have a 2.1 or 1.9 block, you will know the one I
>> mean.
>>
>> Anyone?
>>
>> Thanks,
>>
>> Jim
>>
>