This morning, I put a multimeter to the battery and I got 11.9-12.0 volts at
idle. I took both the alternator and the battery to the LAPS (F left out
intentionally) to have them tested. The battery and alernator both test
okay. This is a tester at an Advance Auto that only says "PASS" or "FAIL". I
didn't see a voltage reported on its display. The battery is strong with no
indication of weak cells.

I replaced one of the large ring terminals on a red lead, not the one to the
starter. I assume this is to the battery, yes? It was crusty and the
insulation was cracked. I cleaned up all other terminals and connections and
now I get 13.9 volts at idle. If 13.8-14.5 volts is acceptable, do we think
I can attribute this low-ish voltage to corrosion in cables or should I be
concerned about the alternator still?

 Thanks one and all. I will test the alternator and battery at my FLAPS.
>
>

Cheers,

--
mordo
1990 Carat