

| Subject: | Re: Re Stopping the flashing coolant light for good |
| From: | Sam Conant |
| Date: | Fri, 15 Jun 2007 17:08:13 -0400 |
Excellent, Dennis. Tks much! SamC ----- Original Message ----- From: "Dennis Haynes" <d23haynes57@HOTMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, June 15, 2007 4:51 PM Subject: Re: Re Stopping the flashing coolant light for good > Next time it happens, pull off the road and do not shut off the engine. > Open > the engine lid and check the level in the main expansion or pressure tank. > This is the one to the left, under the pressure cap. Is it completely > filled? Yes, problem with sensor circuits. No, Coolant is low. Rev engine. > Does the level go lower? Yes, air in system. Grab and squeeze a hose. Is > it > hard, like a bicycle tire? Yes, pressure cap OK possible combustion gasses > in system. If soft, bad cap or significant leak. > > Turning engine off or even at idle, coolant in a system with air will go > back into the bottle and you will think the system is full and you got a > false alarm. > > Dennis > > > >>From: "Sam Conant" <samcvt@comcast.net> >>To: "Dennis Haynes" <d23haynes57@HOTMAIL.COM>,<vanagon@GERRY.VANAGON.COM> >>Subject: Re: Re: Re Stopping the flashing coolant light for good >>Date: Fri, 15 Jun 2007 11:58:17 -0400 >> >>My 84 Westy shows the coolant red light and the gauge maxes regularly. >>I've had several seasoned VW mechanics look throughout the system for a >>problem. I am not losing coolant, the system moves coolant throughout, and >>the reservoir shows appropriate levels. The mech here who I trust without >>question (he has helped me maintain the vehicle from 11k - 202+k miles) >>says there is nothing wrong ... >>Sam Conant >>Colchester, Vermont >>----- Original Message ----- From: "Dennis Haynes" >><d23haynes57@HOTMAIL.COM> >>To: <vanagon@GERRY.VANAGON.COM> >>Sent: Friday, June 15, 2007 11:27 AM >>Subject: Re: Re Stopping the flashing coolant light for good >> >> >>>The problem with relying on the temparature guage is that the sensor >>>relies >>>on coolant being there and flowing. If not for the steam, an empty >>>cooling >>>system will have the gauge reading cold. Especially if the sensor is >>>mounted >>>in a remote, plastic housing. That is why you have the alternator light >>>to >>>let you know the pump stopped turning and the coolant level light to let >>>you >>>know the level is low and the pump is sucking air. >>> >>>Dennis >>> >>> >>>>From: Don Hanson <dhanson@GORGE.NET> >>>>Reply-To: Don Hanson <dhanson@GORGE.NET> >>>>To: vanagon@GERRY.VANAGON.COM >>>>Subject: Re: Re Stopping the flashing coolant light for good >>>>Date: Thu, 14 Jun 2007 21:41:48 -0700 >>>> >>>> Yah, you are right. I couldn't figure out how to wire it into the >>>>Cabriolet motor, and at the time, I figured.."Hey, if the coolant goes >>>>out, >>>>I will probably see the temp. gauge go up anyway"...but, of course, that >>>>may >>>>be wrong, with the Vanagon... >>>> Actually, I am putting in a couple of more gauges right now..an oil >>>>temp >>>>gauge is one thing I really like to have on my cars, and a real oil >>>>pressure >>>>gauge..I have a bunch of Autometer gauges left over from my race car.. >>>> Don Hanson >>>>----- Original Message ----- >>>>From: "Dennis Haynes" <d23haynes57@hotmail.com> >>>>To: "'Don Hanson'" <dhanson@GORGE.NET>; <vanagon@GERRY.VANAGON.COM> >>>>Sent: Thursday, June 14, 2007 8:23 PM >>>>Subject: RE: Re Stopping the flashing coolant light for good >>>> >>>> >>>> > When a coolant leak causes your engine to fry, you will wish the >>>> > light >>>>was >>>> > working. >>>> > >>>> > Dennis >>>> > >>>> > -----Original Message----- >>>> > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On >>>>Behalf >>>>Of >>>> > Don Hanson >>>> > Sent: Thursday, June 14, 2007 10:53 PM >>>> > To: vanagon@GERRY.VANAGON.COM >>>> > Subject: Re Stopping the flashing coolant light for good >>>> > >>>> > Mine (84 I-4 conversion faux-Westie) was flashing when I bought it. >>>> > Likely a function of it being converted to the I-4 motor..I tried and >>>> > tried to get that sucker to stop flashing...Until I finally took out >>>> > > >>>>the >>>> > whole clock and made a nice little ovoid piece of black electrical > >>>>tape. >>>> > Put that right over that bulb and re-assembled the instrument in the >>>>dash. >>>> > You can't even see that black tape in there, and the light? Probably >>>> > still flashing, but who cares? >>>> > Don Hanson >>>> > >>
Have something to add on this topic today? Revive this thread in the forum »