On 10/17/06, Joy Hecht <jhecht@alum.mit.edu> wrote:
>
> I've got a propex too.  It does put out good heat - but if the bed is
> open,
> I find the heat sits under the bed and doesn't get to me!

I have a somewhat similar problem with my Propex, mounted in the same
place.  Check the rotation/orientation of the heat vent.  It turns and will
direct the heated air.  I've set mine to blow as straight out as I can and
that helps.  I've also found that I am getting heated air flowing back over
the bed area but it is disbursed and that area heats up slowly.