Volks,
Could use any advice on my current problem (among others!).
For some reason, I'm not getting power to the ECU.
'88 Carat, Digifant,  with some jury-rigging done to the wiring in the
engine compartment. Only have Start signal from ECU. no Pwr.
According to the Bentley, power should come from the ignition switch.
Swapped out ign. switch with a known good one, no good.
All fuses in box are OK, and wiring up front looks good.
Installed an ECU set up with DigiTool, no power-up.
Starter turns over, but no fuel pump!
Any advice appreciated!
Thanks,
Doug in CT