Just a water pump change and a few other parts...

Water pump

         "        to rt side block hose & new clamps

            "       pipe to rt side block

Water pump to oil cooler pipe new hose

Installed metal pipe on rt side block to replace plastic

Oil cooler oil seal

     "        Two hoses & 4 new clamps

Thermostat & seal

          "      to head seal

Temp 2 sensor

Oil fill pipe (new one is higher)

3 new belts

New pressure tank

New seals in head drain bolts

New thermostat to oil cooler pipe hose and clamps

New seal under metal pipe on rt head

Oil change

Remove radiator

Add heat blocking mat to firewall

Fix leaking hose to radiator

Change fan motor

New radiator drain seal

Well, I decided to change the pump and do a few other parts changes at the
same time while the coolant was out.

There is probably other things done that I do not recall being sleep
deprived.

IF you do not have a hose clamp pliers, you need to get some to aid in the
installation and remover of the hose clamps.

I picked mine up at Harbor Freight Tools.  I do not think that I could have
finished the installation of the many clamps without them!!!

All is well