Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Digifant stock timing = poor performance?
From:Robert Donalds
Date:Fri, 2 May 2003 22:27:39 -0400

Fellow vanagon types 
Setting the timing its done at an idle. line up the case seem with the notch on the pulley done. If the Timing mark moves around as you attempt to do this than the throttle switch is not working correctly so the ECU does not know that the engine is at an idle.
Bob Donalds
Http://www.bostonengine.com