Happy Holidays Volks

Thanks for the responces about my turn signal problem problem.  It appears
it won't be as simple as  changing the relay.  Maybe it's as simple as a
loose wire connection somewhere in the convoluted route you describe.  I
hope it's not a broken wire/solder connection somewhere.  I guess my next
step is to go poke some wires.  If nothing turns up, I will replace the
handle assembly( PITA ).  Any helpful hints from all you folks will be
gratefully considered.
Later:

Dave B.
1983 Tiico Westy
1983 WBX Westy

----- Original Message -----
From: "Gregory Smith" <budgetzagato@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, December 27, 2002 12:23 PM
Subject: Re: Turn signals

> Hi Dave,
>
> The emergency flasher relay is indeed also the turn
> signal relay, but keep in mind the wiring for the turn
> signals goes through the emergency flasher switch as
> well.  What I'm getting at is the switch going bad
> could be the problem.  If it were me I'd check to see
> if I was getting enough current coming out of the
> emergency flasher switch to lights, if any, when the
> turn signal switch is activated.  The current comes
> from the fusebox, through the flasher switch, through
> the flasher relay, through the flasher switch again,
> through the turn signal switch, then the relay again
> then to the lights so you can see how a bad switch
> could easily cause the problem.
>
> I hope this helps,
> Gregory Smith
> '84 Vanagon
> Olympia, WA
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
>