I'm taking my wife's '87 Westy to a traditional, old fashioned alignment
shop tomorrow.  The tires are wearing on the inside edges. The Bently manual
reads:
 "Measurements for "full load" & "half load" apply for vehicles which cannot
be measured unladen because of special equipment installed"  and:
"Some models from 1986 on, have a lower chassis height. For these vehicles
use the "half load" measurements for the "empty" settings.
So, what settings should be used for an '87 Vanagon GL Westfalia, air &
cruise, water tank empty, only extra being a pull-out awning over the side
door?
Ron Komoroski