

| Subject: | Re: Subject: Re: Want to paint camper roof |
| From: | Alistair Bell |
| Date: | Tue, 14 May 2002 22:03:55 -0700 |
Hope I get this posted before David Beierl <g> In a marine situation its not a good idea to use aluminium rivets in a stainless steel object (but ok to use stainless steel rivets/bolts etc in an Al object...relatives sizes and all). If an electrolyte is present, the Aluminium rivet will corrode as the anode. Use stainless rivets or nuts and bolts Alistair -- '82 Westy -> diesel converted to gas in '94 albell@uvic.ca http://homepage.mac.com/alistairbell/home/ > From: "Terry K." <CTONLINE@WEBTV.NET> > Reply-To: "Terry K." <CTONLINE@WEBTV.NET> > Date: Tue, 14 May 2002 23:01:30 -0500 > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Subject: Re: Want to paint camper roof > > ave, > > If you want to remove the old cleats this answer is pretty simple--- > > Drill out the 3/16 's rivets, and install the new cleats---pop rivet > them back in--- > > I would suggest using aluminum rivets----so they don't rust--- > > Done--- > > Later, > > Terry > > > E-mail message > > How did you secure the new stainless cleats to the fiberglass? I believe > the originals are installed with pop rivets, are they not? > Dave in KC > > 85 Westy with rusty cleats > ----- Original Message ----- > > From: Thomas J. LaLanne <lalanne@IX.NETCOM.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Tuesday, May 14, 2002 9:37 PM > Subject: Subject: Re: Want to paint camper roof > > > ��������You probably don't want to paint it. Mine was > really oxidized, and my luggage carrier was stained with rust from the > old cleats. I went to a West Marine outlet and bought a rust-removing > solution that worked wonders. The rust stains left as if by magic with > very little rubbing. � I have also replaced the cleats with a > stainless steel set that I bought from GoWesty. West Marine had a > compound that promised to remove oxidation, but it was just a light > polishing compound. I finished my luggage rack beautifully by buffing it > with polishing compound with an orbital buffer, and then following that > with a good polymer glaze wax. Complete with the new Westfalia decal I > bought from Bus Depot, it looks like a new unit. Next, I plan on doing > the rest of the poptop. > Tom LaLanne > '86 Subie Westy >
Have something to add on this topic today? Revive this thread in the forum »