

| Subject: | Re: [Syncro] re: Fuba on Vanagon. 10 inches fwd of lip |
| From: | Mick Kalber |
| Date: | Wed, 24 Jan 2001 22:01:38 -1000 |
but where do you put it on a westy? Mick Kalber 89 syncro westy "daddeo" ----- Original Message ----- From: "Carl Hansen" <CARL_HANSEN@IEEE.ORG> To: "SyncroList - post" <Syncro@egroups.com>; " Vanagon (Gerry) - Post" <vanagon@gerry.vanagon.com>; <planetp@EARTHLING.NET> Sent: Wednesday, January 24, 2001 9:04 PM Subject: [Syncro] re: Fuba on Vanagon. 10 inches fwd of lip > I installed an Amplified FUBA on SyncroBeast several years ago. Just like > the 16 valve and other "hot" VW's have. It works great. > > Drill the hole for the antenna 10 inches forward of the back of the roof. > It needs to be there to clear the AC components, and to be far enough > forward for connector parts to clear the headliner. > > I ran the antenna lead up the windshield pillar and back along the driver > side (left) roof channel edge to the back of the van. The antenna lead > that came with the antenna was just long enough. It's a trick to get the > lead up the pillar, then another trick to feed it in the channel along with > the other wires to the back but it CAN BE DONE without dropping the > headliner. Access thru the lights in the roof corner helps, I may have > dropped the liner a bit over the door ONLY. I believe I fed a piece of 12 > gauge house electrical wire in from the back first (section by section) to > attach the antenna lead to and pull it thru. You can't make a FAT > connection where the two connect or the interface won't fit thru some of > the holes. > > Hope this helps anyone else that wants to try mounting a FUBA to their Vanagon. > > later. > > Ch > > Carl Hansen > 952.440.2899 > carl_hansen@ieee.org > > Ch > > '89 SyncroBeast Vanagon - Thank God for Brother-in-laws. SyncroBeast together. > '87 16V GTI > '80 850 Yamaha Special > '87 16V GTI w/ hale damage - parting out - body gone, parts remain > '89 16V GTI w/ toasted motor > '86 Scirocco (8 valve w/ auto) - SO's > > Prior Lake, MinneSnowta > > If you would like to modify your subscription settings (including unsubscribing), visit: > http://www.egroups.com/subscribe/Syncro > > > > > > > > > > > > > > > >
Have something to add on this topic today? Revive this thread in the forum »