Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: My Eurospec conversion problem
From:Dave Bayer
Date:Thu, 14 Oct 1999 19:22:49 -0700

David Marshall wrote:
>
> I do simular conversions with CIS, Digifant and Motronic.  Here are my
> experiences
>
> 1 - I find this a problem with the Digifant systems.  The computer wants to
> run the engine at 800rpm which is too low, especially if it is cold or the
> timing is slightly off.
>
> 2 - The is common with all 50 degree mounting angle conversions, there are
> some manifolds out there that are better than others for clearance.

FWIW, the SA conversion (with the shorter block, not the ABA block) has
a
unique manifold on it that does not seem to hit. You can kind of
see how it is slightly different than the manifolds on the www.tiico.com
site...

dave