Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Sliding Door Adjustments
From:Vernon Craddock
Date:Fri, 7 Aug 1998 08:38:39 -0700

My sliding door is now squarely aligned.  My thanks to Jim Catterson for the
info.  The "U" hinge height is adjusted by the two bolts anchoring it to the
door.  I put a padded floor jack under the edge of the door, loosened the
bolts, raised the door with the jack & resecured.  After adjusting the striker
plate (pin) to match, everything works great.  It's nice to see straight lines
down the side of the van!

Thanks
Vernon