

| Subject: | I finally installed my window A/C |
| From: | Jeffrey Layton |
| Date: | Sat, 20 Jul 1996 09:45:22 -0400 (EDT) |
Now tha summer session is almost over I had the time yesterday to install my window A/C. The unit is a Goldstar and it is 18" long, 12"tall, and only 13" deep. It was by far the smallest 5000 btu I could find and has the "European Styling", so it is not big and bulky. I installed it in the rear part of the middle drivers side window, between the stove and the rear table. I had to let an autoglass place take out the glass and install a custom fit piece of tinted plexiglass that they cut with the hole for the A/C. There was about 2 inches of plexiglass on the top of the A/C because the height of the window was a little higher. Everything went as I expected except I could not put the A/C in as far as I wanted, so about 6"-7" is sticking out instead of the 3" or 4" that I wanted out. I attached the bracket that came with the unit to the bottom of it and bolted the unit through the window seal and the metal. i then did some serious calking. I did not have to make any holes to the side of the van for a bracket because The unit seems very secure andd I forgot to mention it only weighs 42 pounds. I am going to calk some more today to insure a very tight seal. I tested it out and the Westfalia turned into a meat locker within 20 minutes. All in all I am very pleased except the place that took the original glass out broke it, so be very careful. If any body has any questions, don't hesitate. Jeff Layton 89 westy
Have something to add on this topic today? Revive this thread in the forum »