Mike

        Could possibly be that the pivot joints in that rear mechanism need a good dose of lube

so if You haven’t already done so, give them a good dose of TriFlow or the like to see if that

might help ~

> On 26 Feb , 2023, at 8:20 PM, Mike Miller <mwmiller6@ATT.NET> wrote:
> 
> Thanks for the idea. So far Felder industries hasn't made a recommendation but if they/he does I'll follow it/them.
> Rollers were replaced about 10 years ago. I guess that means time to check them...however that's done.
> Many things are starting to be re-done and I was complaining about that until I realized I'd had the Syncro about 20 years. How'd that happen?
> Mike
> 
> 
> 
>    On Sunday, February 26, 2023, 5:52:22 PM PST, Dan N <dn92610@gmail.com> wrote:  
> 
> Just follow Jim Felder's recommendations...
> 
> Maybe you will need new rollers too, because when they are worn the door
> will sag and opening/closing the sliding door will be harder and harder...
> 
> On Sun, Feb 26, 2023 at 5:21 PM Mike Miller <mwmiller6@att.net> wrote:
> 
>>   87 syncro.
>> My sliding door has been getting more and more difficult to open. The rear
>> edge wasn't jumping out when the handle was opened so instead of reaching
>> back and pulling out I was jerking harder and harder on the handle.
>> Handle broke.
>> So now I need to replace the handle and whatever mechanism makes the rear
>> edge pop out. A handle I can find because I know the name for it. What is
>> the rear mechanism called so I can check the usual suspects to find a new
>> one?
>> TIA
>> Mike
>> 
>