Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: No spark, good coil, etc
From:OlRivrRat
Date:Wed, 27 Feb 2019 10:16:38 -0700

On 24 Feb , 2019, at 5:18 PM, thewestyman wrote:

> There is 11.8V going to the coil.

        Is this just a Static Test Result or While Cranking ~

Also remember that the ECU Needs To Know that The Ignition Switch Is In Run or Start

Position before It will provide all the Necessary Signals ~

                                                        ORR ~ DeanB