Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Splitting the ventilation housing
From:John Goubeaux
Date:Thu, 7 Sep 2017 08:47:14 -0700

Guys,

 � I assume you are referring to the rear-most side window vents along
the rear edge eg�  air EXIT vents ?

I've got my windows out for a paint job and have not gotten to these
vents but can see that the foam inside has dried up and is crumbling.

Or are you referring to the airbox up front under the dash ?

-john

On 9/6/17 3:54 PM, Alistair Bell wrote:
> What others have said and I'll add that I found using an angle grinder and flap disk to grind off the tabs was pretty quick, albeit smelly :-)
>
> Alistair
>
>> On Sep 6, 2017, at 12:16 PM, Robert Ueltzen <robueltzen@GMAIL.COM> wrote:
>>
>> Any suggestions on how to separate the two halves of the housing.  Mine is
>> glued.  Did you use an exacto knife or a dremel tool with cutting disk? Or
>> does the glue release with enough leverage (which I am afraid to try)?