Skip to main content
vanagon.com
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Fxed was Cold start valve
From:Thewestyman
Date:Wed, 5 Jun 2013 01:55:50 -0700

It turned out to be the computer.  Fired up right away.
Thanks to all the good intentions fellows.
Zoltan

-----Original Message-----
From: Dennis Haynes
Sent: Saturday, June 01, 2013 9:57 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Cold start valve

Waterboxers don’t have a cold start valve. That buzzing thing in the center
of the idle is the idle control valve. It is an engineered add on to
compensate for O2 sensor mixture changes, warm up fast idle, and varying
loads. The controller is located in front of the passenger side tail light.
It shares the temp 2 sensor with the ECU for warm up idle and it also has
inputs for power steering pressure and the AC compressor. It get power when
the ignition switch is turned on.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Thewestyman
Sent: Friday, May 31, 2013 8:49 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Cold start valve

That thing in the middle of the engine, I think it’s called the Cold start
valve, is still buzzing, running after I switched the car off and pulled the
key out.  Something is going on, because it also won’t start now.  I hope, I
don’t have something strange.
Anyone?
Z

Have something to add on this topic today? Revive this thread in the forum »