Tonight I installed a Group 34 Optima battery in my TriStar.  I did as many
people have done, laid it over on it's side so the terminals point forward
and then secure the battery clamps.  Has anyone ever started arc-welding
using this method or have a battery be a projectile in an accident?  With
the battery on it's side the positive clamp is only a few millimetres away
from the floor under the seat and there is no way of securing the battery.
What I did to make me feel half at ease, is use the stock clamp down bar to
force the battery to the rear of the tray so it can't lift up and used four
layers of water softening salt bag under the positing terminal so will not
[hopefully] touch if the Syncro goes on a weird angle or gets into an
accident... but it can still slide from side to side - if it goes too much
to the passenger side the positive clamp will touch the factory battery
retaining bar.  I have inserted a 2x4 and a 1x4 piece of wood on the
passenger side of the battery to keep it in the driver side of the tray...
someone please tell me there is a more elegant and safe way of doing this!

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel-Hixon Road
Quesnel BC Canada  V2J 6Z3

http://www.fastforward.ca    mailto:sales@fastforward.ca
Phone: (250) 992 7775        FAX: (250) 992 1160

- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models

Due to the large volume of email  we  receive,  PLEASE  include  previous
emails when responding.  This will allow us to read the complete dialogue
in one message and will result in quicker and more  accurate  responses.