Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: leaky head gasket question again
From:Nick L. Meyers
Date:Tue, 2 Apr 2002 21:47:47 -0500

JB Weld sounds great.  I will be in the process of resealing both my
1.9L heads as I have one on the passenger side that has taken a dump so
I have opted to do both.  Can someone elaborate on the JB Weld
application, for instance- 1) application 2)sanding down process
3)pitfalls to avoid. I think this is a great, inexpensive fix that seems
to be a winner.  Any more info would be great list! Thanks!

Nick L. Meyers
85 Westy Awaiting Head Reseal!

nmeyers@surfbest.com
nmeyers@hotmail.com

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Mike Collum
Sent: Tuesday, April 02, 2002 8:10 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: leaky head gasket question again

<snip> JB Weld in the head pits? This really works? How many others on
this list have used this technique? <snip>

Last year I had to replace one head so I resealed the other while I was
at it.  I used JB Weld to level the pits where the rubber gasket fits
between the head and the water jacket.

No problems so far and I continued to use van as a daily driver
throughout the winter (Northern Maine).  I have also made three trips to
southern Virginia (approx 1300 miles one way) maintaining "Uneconomical"
speeds.

Mike
'84 GL "Mongo"