Hi Al,

The description of that youTube video contains some info that explains the absence of the 90 degree bend in your pipe.

-Mark

> On Feb 24, 2025, at 4:12 AM, Al Carey <careyald@GMAIL.COM> wrote:
> 
> I’m the guy with the 88 westy Eric was posting about. Thanks for the link to the VW video, Mark. The GW pipes in the video and on Eric’s van are different, the return pipe has a 90 degree bend at the engine end. My BusDepot pipes don’t have that, they just end pointing at the rear of the van.
> The video may be helpful regardless, I’ll try to match up my power pipes as much as possible.
> 
> Thanks all for the help,
> Al 
> 
>> On Feb 23, 2025, at 4:27 PM, Mark McCulley <mark@markmcculley.com> wrote:
>> 
>> Doh, forgot to include the link. Here it is:
>> 
>> https://www.youtube.com/watch?v=h1BE5u9RnfU
>> 
>> -Mark
>> 
>>> On Feb 23, 2025, at 1:23 PM, Mark McCulley <mark@markmcculley.com> wrote:
>>> 
>>> He should be able to discern what goes where by watching this video from GW.
>>> 
>>> -Mark
>>> 
>>>>> On Feb 23, 2025, at 1:00 PM, Eric Caron <ericcaron96@COMCAST.NET> wrote:
>>>> 
>>>> Hi list,
>>>> 
>>>>    a new VW vanagon owner is learning fast as he puts together a 88 Vanagon that was found recently after being left in a garage for 20 plus years.
>>>> 
>>>> He has the four piece Bus Depot pipes and is a bit uncertain of the orientation.  He already remove the originals from his Automatic 88.  My pipes look different so he could not use either my 85 or my 84 as a guide.
>>>> 
>>>> Any tips from the list I can share with him as to the orientation of the Bus Depot four piece kit?
>>>> 
>>>> Eric