Hi Mark,

        I recently purchased a headlight switch from BusDepot.  The price was good and the quality good.  Perfect fit and function.   I don’t know the brand. 

Eric Caron 

> On Feb 10, 2025, at 11:17 AM, Mark McCulley <mark@MARKMCCULLEY.COM> wrote:
> 
> Well that didn't go well, both of the tabs broke off when I tried to squeeze them with pliers. The plastic is very brittle. Crap part, Febi, but all that is available from what I can tell.
> 
> -Mark
> 
>> On Feb 1, 2025, at 8:59 AM, Mark McCulley <mark@markmcculley.com> wrote:
>> 
>> Thanks, I was considering squeezing the tabs with pliers. 
>> 
>> -Mark
>> 
>>> On Feb 1, 2025, at 8:55 AM, Dan N <dn92610@gmail.com> wrote:
>>> 
>>> hi Mark,
>>> 
>>> Maybe you should try this..
>>> 
>>> Take a plier with the jaw opening large enough to hold both side tabs. Use the plier to squeeze both tabs toward the birthday of the switch. Use a heat gun (loe setting) or a hair dryer (medium or high), blow hot air toward the tabs  for 30 seconds. Now put the switch in the instrument panel. If it doesn't work then redo the same and blow the heat longer.
>>> 
>>> dan
>>> 
>>> On Sat, Feb 1, 2025 at 8:47 AM Mark McCulley <mark@markmcculley.com <mailto:mark@markmcculley.com>> wrote:
>>>> My headlight switch had become intermittent so I ordered a new one from GW. The new one was Febi brand. The switch itself was very stiff, I could live with that, but I was unable to get it properly seated into the instrument panel. I tried for about 15 minutes but could only get one of the side tabs to click into place. Very frustrating. I cleaned up the switch contacts on the old switch with some Deoxit and reinstalled it, seems to be working fine for now at least. I don't know whether to try to return the new switch to GW or give it another try. Has anyone had a similar problem with new headlight switches?
>>>> 
>>>> -Mark