Hi folks,

I’m hoping someone here can talk me through how I might lower my front spring enough to get a special shim I have on top of it.  

        I have changed the front shock many years ago but believe the spring was still under tension.

Can I do this without a spring compressor.  This is a tool I am concerned about using due to safety. 

Currently my front is measuring 16.5 inches from upper edge to middle of hub.  My rear is 17.5.  And my other van is 17.5 front and rear.  My 85 shows as not level when on a level surface and it used to register as level. 

So, I’d really like to get the shims in on top of those springs. 

So, any tip on the process is gratefully appreciated.

I have a helper available next week, but he is not familiar with the vanagon, but is mechanical.  In fact,  He is now restoring a 1988 Vanagon camper so he is learning fast.

Directions anyone?

Eric Caron