Or just pull that fuse in the little box at the drivers side b pillar. Or a switch there 

Alistair 

> On Aug 1, 2022, at 8:09 AM, Jim Felder <jim.felder@gmail.com> wrote:
> 
> The surprise for me is that there is not a cut-out for the fan circuit at
> any place where there could be one.
> 
> Maybe a high-temp switch near the burner and a relay for the electric modes?
> 
> Jim
> 
>> On Mon, Aug 1, 2022 at 10:05 AM Alistair Bell <albell@shaw.ca> wrote:
>> 
>> What I did some years ago, was to take out the stick thermo switch on the
>> back fins and replace with thermo probe for a programable tstat. Was during
>> my ongoing effort to make the propane fridge work a wee bit better.
>> 
>> I thought I’d play with lower temp setting for the fan to come on. Last
>> year I replaceded the original , kinda clunky , programable unit for a
>> slimmer inkbird brand one.
>> 
>> I wasn’t convinced that adjusting the fan set point really did much. But
>> the obvious benefit was the fan would stay off if the control unit was off.
>> No runaway fan on a hot day thing, that this thread is about.
>> 
>> Funny how it’s still a surprise for some that the stock fan works that
>> way  :-)
>> 
>> Alistair
>> 
>>> On Jul 31, 2022, at 12:46 PM, Jeff Palmer <w.jeff.palmer@icloud.com>
>> wrote:
>>> 
>>